How do I enable autobatch or change the autobatch time on a Dejavoo Z8/Z11 terminal?

For more and updated information go to http://support.kastenberry.com

Please contact the Sales Executive assigned to your account if you want to enable, disable, or alter automatic batch settings. This can be done on the terminal level, but when security updates are pushed down to the terminal, it can overwrite the settings on the device itself. If you notify your Sales Executive, we can build it into the file so these file vs. terminal conflicts can be avoided.

To enable/disable automatic batch and/or to change existing batch time manually, follow these instructions.

Enable/Disable & Change Batch Time on a Z11:

1. From the idle screen tap the green OK key to access the Core Menu
2. Tap OK for SETTLEMENT
3. Enter your manager password (default is 1234)

To DISABLE auto batch:

1. With your finger tap OFF
2. The device will show Updating Params and then return to the idle screen

To ENABLE auto batch:

1. With your finger tap the word Dial
2. Use the keypad to input desired auto batch time in HHMM format (24hr/military time) 
3. For Interval, leave at default of 00:10 by pressing Green OK key
4. For Period leave at default of 00:55 by pressing Green OK key
5. The device will show Updating Params and then return to the idle screen

Enable/Disable & Change Batch Time on a Z8:

1. From the idle screen tap the green OK key to access the Core Menu
2. Tap OK for SETTLEMENT
3. Use the up and down arrows to highlight BATCH SETTINGS

To DISABLE auto batch:

1. Press the F4 key to disable automatic batching
2. Hit the red X key to return to the main screen

To ENABLE auto batch:

1. Press F2 key to enable auto batch
2. Use the keypad to input desired auto batch time in HHMM format (24hr/military time)
3. For Interval, leave at default of 00:10 by pressing Green OK key
4. For Period leave at default of 00:55 by pressing Green OK key
5. The device will show Updating Params and then return to the idle screen