How do I set up my Pax S300 to work with Verosa?

For more and updated information go to http://support.kastenberry.com

Prepare the Device to Receive the File

1. Connect an ethernet cable to the red LAN port on your device
2. Unplug and plug your S300 back into power
3. While it is booting up, press the Function Key when the screen says "Self-Test"
4. Once the device loads, tap MENU on the bottom right
5. Press 4 for Remote Installation
6. Press 1 for New Installation
7. Press 1 for TCP
8. The screen will say Remote IP
   Enter 216.238.144.195 and press the green Enter key
   To enter a . press 1 followed by the Alpha key until it shows a period
9. The screen will say Remote Port
   Enter 8252 and press the green Enter key
10. The screen will say Terminal ID
    Enter 30030097 and press the green Enter key
11. The device will download several files and reboot

Download the File

1. Tap Menu
2. Tap Communications
3. Tap Main
4. Tap LAN
5. Press Red X until you are the idle screen
6. Tap Menu
7. Tap System Settings
8. Tap App Management
9. If prompted for a password use the current date
   Example: June 2nd, 2021 would be 06022021
10. Tap Activate
11. Tap Online
12. Press the Red X twice
13. Tap App Load